How do I pair or sync my lights with the Simple RemoteUpdated a year ago
Here are some instructions for pairing your lights with the Simple Remote
Setting up the Light
• Turn on the power switch on the back of your light
• Go to the touchscreen on the side of the light and press the 'Set' button
• Press the button labeled 'Remote'
• Press the '1' button and hit 'OK'
• You should see the words "Remote 1' on your light
• Repeat for each light
Setting up the Simple Remote
• You should now be able to control your lights using the simple remote
Please note, the functionality of the Simple Remote is limited to running all the lights for 20 minutes at full power. There is no way to adjust the timer using the simple remote.
If your lights are not responding to the Simple Remote, the wireless communication may have been turned off in error. Please hard press the 'On' button for at least 5 seconds until the indicator light blinks. Once complete single press the 'On' button and see if the lights illuminate.